Cleaning And Care; Cleaning Agents - Miele K 34472 iD Operating And Installation Instructions

Make sure that water cannot get into
the electronic unit or into the lighting
or the metal discs (contacts) in the
left-hand shelf supports.
Cleaning water must not get into the
drain hole.
Do not use a steam cleaning appli‐
ance to clean this appliance. The
steam could reach the electrical
components and cause a short cir‐
cuit.
The data plate located inside the ap‐
pliance must not be removed. It con‐
tains information which is required in
the event of a service call.

Cleaning agents

To avoid damaging the surfaces of your
appliance, do not use:
– cleaning agents containing soda,
ammonia, acids or chlorides,
– cleaning agents containing descaling
agents,
– abrasive cleaning agents, e.g. pow‐
der cleaners and cream cleaners,
– solvent-based cleaning agents,
– stainless steel cleaning agents,
– dishwasher cleaner,
– oven sprays,
– glass cleaning agents,
– hard, abrasive sponges and brushes,
e.g. pot scourers,
– melamine eraser blocks,

Cleaning and care

– sharp metal scrapers.
We recommend treating stainless
steel surfaces with Miele stainless
steel conditioning agent (see Guide to
the appliance - Optional accesso‐
ries").
Unlike stainless steel cleaning agents,
the conditioning agent does not con‐
tain any abrasive substances and will
gently remove soiling. Each time it is
used, it forms a water and dirt repel‐
lent protective coating.
Cleaning and conditioning agents
used inside the appliance must be
food safe.
We recommend using lukewarm water
with a little washing-up liquid to clean
surfaces of the appliance.
The following pages contain impor‐
tant information on cleaning.
41