Resetting the grease filter operating
hours counter
After cleaning, the operating hours
counter needs to be re-set.
Whilst the fan is switched on, press
the operating hours control for
approx. 3 seconds, until only the 1 is
flashing.
The grease filter symbol goes out.
If you want to clean the grease filter(s)
before the operating hours counter has
reached its maximum,
Press the operating hours control
for approx. 6 seconds, until only
the 1 is flashing.
Charcoal filters
With recirculation mode, two charcoal
filters must be fitted in addition to the
grease filters. These are designed to
absorb cooking odours.
The charcoal filters are inserted in the
separate recirculation unit.
When fitting for the first time, activate
the operating hours counter (see
"Operation").
When to change the charcoal filters
Always replace the charcoal filters
when they no longer absorb kitchen
odours effectively.
They should, however be replaced at
least every 6 months.
The charcoal filter operating hours
symbol will light up to remind you to
change the charcoal filters.
Cleaning and care
The charcoal filter operating hours
counter needs to be activated before
using for the first time (see
"Operation").
Resetting the charcoal filter
operating hours counter
After changing the charcoal filters, the
operating hours counter needs to be re-
set.
To do this, with the fan switched on,
press the operating hours control
once, then press it again and
hold it for approx. 3 seconds until
only the 1 is flashing. The Charcoal
filter symbol will go out.
If you want to replace the charcoal
filters before the operating hours
counter has reached its maximum:
Press the operating hours control
twice and hold it for approx. 6
seconds until only the 1 is flashing.
Disposing of the charcoal filters
Used charcoal filters can be disposed
of with the normal household waste.
31