Epson PowerLite D6150 Installation Handbook page 2

Epson PowerLite D6150 /
D6155W / D6250
Power light
Red
Red
On
On
On
Lamp Temperature
light light
Off Red
Flashing Off
red
Off Off
Off Off
Off Off
INSTALLATION HANDBOOK
Filter light Status and solution
Off Projector has overheated and turned off.
Leave it turned off to cool down for five
minutes.
• Make sure that the vents and air filter are
not clogged with dust or obstructed by
nearby objects.
• If operating the projector at high altitude,
turn on High Altitude Mode.
• If overheating continues, replace the air
filter.
• If the problem persists, unplug the projector
and contact Epson for help.
Off Lamp has a problem.
• Check to see if the lamp is burned out,
broken, or installed incorrectly. Reseat or
replace the lamp as necessary.
• Make sure that the vents and air filter are
not clogged with dust or obstructed by
nearby objects.
• If operating the projector at high altitude,
turn on High Altitude Mode.
• If the problem persists, unplug the projector
and contact Epson for help.
Flashing It is time to clean the air filter.
green
Flashing Low air flow through the projector.
orange
• Make sure that the vents and air filter are
not clogged with dust or obstructed by
nearby objects.
• If low air flow continues, replace the air
filter.
• If the problem persists, unplug the projector
and contact Epson for help.
Orange No air filter. Check to see if the air filter is
securely installed.
Lamp and Status Information
2