Download Print this page

Pioneer DDJ-WEGO3 Firmware Update Procedures page 2

Ddj-wego3 dj controller
Hide thumbs Also See for DDJ-WEGO3:

Advertisement

Read Before Use (Important)
・Extract the downloaded update file for updating.
・ASIO driver exclusively for DDJ-WEGO3 is required to be installed
for Windows users. See the Operating Instructions (DJ software
Setup).
・You cannot use iPhone/iPad to update the firmware of
DDJ-WeGO3.You need to use a computer(Windows/Mac)
to update the firmware.
・If you should have any questions, please contact the
Pioneer Customer Support Center.
Reference Information
This updater has been verified to operate on the operating
systems below;
・Windows : Windows 8.1/8/7
・Mac :
OS X 10.9/10.8/10.7/10.6
Updating Procedures
Disconnect all the cables from the unit.
Note:
And close all applications on your computer before running this updating
procedure.
1) Connect your computer to DDJ-WEGO3 via the USB cable
included with the product.
2) Double-click the update file.
Once the update program is launched, select the
language to be used and click [OK].
3) When the version information confirmation screen
appears, check the contents, then click [Start].
・ If the current version and update version are the same,
there is no need to update. Click [Close].
4) Updating starts. Do not disconnect the USB cable
during updating.
― Approximately one minute is required for updating.
5) When the firmware update process is complete, click the
[OK] button.
Note:
Please note that if you fail to update, once disconnect the
USB cable and start from Step 1) of the above Updating
Procedures.
How to check the Firmware
Version
========================================
For Windows
From the [Start menu], Run [All Programs] → [Pioneer] →
[DDJ_WEGO3] → [DDJ_WeGO3 Version Display Utility].
========================================
For Mac OS X
Open the Apple menu while pressing the option key, then
select "System Profiler" or "System Information ."
Select the [USB] from the [Hardware] to display the name of
the controller. Select the controller to display the firmware
version.
About Trademarks and
Registered Trademarks
・ Pioneer is a registered trademark of PIONEER CORPORATION.
・ Windows is a registered trademark of Microsoft Corporation in the United
States and other countries.
・ Mac OS is trademarks of Apple Inc. registered in the United State and other
countries.
© 2014 PIONEER CORPORATION.
All rights reserved.
PIONEER CORPORATION

Advertisement

loading