Gps; Mounting Brackets - Cisco Aironet 1570 Series Ordering Manual

Outdoor access points
Hide thumbs Also See for Aironet 1570 Series:
Table of Contents

Advertisement

Table 6 describes the antennas available for the Aironet 1572EAC and 1572EC access points. The table lists part
numbers for the antennas as well as gain and other details.
Table 6.
Part Number
AIR-ANT2568VG-N
AIR-ANT2547VG-N
AIR-ANT2588P3M-N=
AIR-ANT2513P4M-N=
AIR-ANT2480V-N
AIR-ANT2450V-N
AIR-ANT2413P2M-N=
AIR-ANT5180V-N
AIR-ANT5114P2M-N=
*
All the above antennas are compatible with UNII-1 band operation under FCC rules except for (AIR-ANT2568VG-N).
For additional antenna specifications, see the
The access points are provided with a sealant tape to protect the antenna connector from weather. Consult the
installation guide

GPS

All Aironet 1570 Series access points have a built-in GPS receiver. To use the GPS functionality, you should order
and install a GPS antenna (see Table 7). The GPS antenna can be selected as a "configurable" option at the time
of the AP order or as a "spare" at a later date.
Table 7.
Part Number
AIR-ANT-GPS-1

Mounting Brackets

Aironet 1570 Series outdoor access points can be mounted on a cable strand, poles, or walls. Table 8 provides the
mounting options for each model.
Table 8.
Part Number
AIR-ACCSMK1570-1
AIR-ACCSMK1570-2
AIR-ACCSMK1570-3
AIR-ACCPMK1570-1
AIR-ACCPMK1570-2=
AIR-ACCPMK1570-3=
AIR-ACCAMK-1=
© 2015 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Antennas for the Cisco Aironet 1572EAC and 1572EC Access Point
Frequency Band
2.4/5 GHz
2.4/5 GHz
2.4/5 GHz
2.4/5 GHz
2.4 GHz
2.4 GHz
2.4 GHz
5 GHz
5 GHz
for proper installation.
GPS Antennas for the Cisco Aironet 1570 Series Access Points
Mounting Options for the Cisco Aironet 1570 Series
Description
Accessory, Strand-Mount Kit 1
Accessory, Strand-Mount Kit 2
Accessory, Strand-Mount Kit 3
Accessory, Pole-Mount Kit 1
Accessory, Pole/Wall-Mount Kit 2 (PMK2)
Accessory, Pole/Wall-Mount Kit 3 (PMK3)
Accessory, Antenna Mount Kit 1 (AMK1)
Gain
Type
Required Quantity and Note
6/8 dBi
Omnidirectional
4; default recommended for maximum omni performance
4/7 dBi
Omnidirectional
4
8/8 dBi
Directional
1; 3x cables and lightning arrestors may be needed
13/13 dBi
Directional
1; 4x cables and lightning arrestors may be needed
8 dBi
Omnidirectional
2
5 dBi
Omnidirectional
2
13 dBi
Directional
1; antenna mount kit may be used to attach directly to AP
8 dBi
Omnidirectional
2
14 dBi
Directional
1; antenna mount kit may be used to attach directly to AP
Cisco Aironet Antenna and Accessories Reference
Description
GPS Antenna
AP1572EAC
(SMK1)
(SMK2)
(SMK3)
(PMK1)
Guide.
AP1572IC
AP1572EC
Page 6 of 17

Advertisement

Table of Contents
loading

Table of Contents