Installation Of Optional Parts - Honda EX5500 Owner's Manual

INSTALLATION OF OPTIONAL PARTS
Remote Control Kit
The generator may be adapted for remote control operation by use of
an optional kit.
INSTALLATION
1. Remove the six 6 x 10 mm flange bolts that attach the control panel.
Remove the control panel.
6 x 10 mm FLANGE BOLTS
6 x 10 mtk FLANGE BOLTS
2. Position the relay box on the back of the control panel with the studs
inserted through the holes in the relay box flange. Install a 4 mm nut
and lock washer on each stud and tighten securely.
4 x 10 mm SELF-
TAPPING SCRE
CONTROL PANEL
COUPLER HOLDER
HOLE IN SUB PANEL
4 mm NUT
45