Baby Lock Crown Jewel III BLCJ18-3 Instruction And Reference Manual page 6

To increase the life of your machine
1. Do not store this machine in areas exposed to direct sunlight or high humidity. Never use or store the ma-
chine near a heater, an iron, a halogen lamp or other hot objects.
2. Use only neutral soaps or detergents to clean the machine. Benzene, solvents and scouring powders can
damage the case and the machine and therefore should never be used.
3. Do not drop or bump the machine.
4. Always consult the manual to replace or fix the hopping foot, needle or any other part of the machine.
To repair or adjust the machine
If the machine does not function properly or needs adjustment, first check the troubleshooting chart in the ap-
pendix to inspect and adjust the machine yourself.
For more product information and updates, visit our website at www.babylock.com.
The contents of this manual and product specifications are subject to change without prior notice.
OPTIONAL U.S. GROUNDING
GROUNDING PIN
This product is for use on a nominal 120 V or nominal 220 V circuit, and has a grounding plug that looks like the
plug illustrated in sketch A in the figure above. A temporary adapter, which looks like the adapter illustrated
in sketches B and C, may be used to connect this plug to a 2-pole receptacle as shown in sketch B if a properly
grounded outlet is not available. The temporary adapter should be used only until a properly grounded outlet
can be installed by a qualified electrician. The green colored rigid ear, lug, and the like, extending from the
adapter must be connected to a permanent ground such as a properly grounded outlet box cover. Whenever
the adapter is used, it must be held in place by the metal screw.
NOTE: In Canada, the use of a temporary adapter is not permitted by the Canadian Electric Code.
GROUNDED OUTLET BOXES
(A)
TAB FOR
GROUNDING
SCREW
ADAPTER
(B)
METAL
SCREW
(C)
5