Sharp AL-2060 Operation Manual page 66

USER SETTINGS
Program
number
12
13
14
15
16
17
18
19
64
Program name
MARGIN WIDTH
MEM. FOR
PRINTER
AUTO KEY
REPEAT
KEY PRESS TIME
KEY TOUCH
SOUND
SOUND AT
DEFAULT
TONER SAVE
MODE
AE LEVEL ADJUST
Setting codes
(factory default
setting appears
in bold)
1: 5 mm
• Use this setting to set the
2: 10 mm
3: 15 mm
4: 20 mm
1: 30%
• Use this to change the
2: 40%
3: 50%
4: 60%
5: 70%
• Use this setting to select
1: ON
2: OFF
• Use this setting to select how
1: NORMAL
2: 0.5 SEC.
3: 1.0 SEC.
4: 1.5 SEC.
5: 2.0 SEC.
1: LOW
• This sets the volume of beep
2: HIGH
3: OFF
• Use this to sound a beep
1: ON
2: OFF
• This mode reduces toner
1: ON
2: OFF
• This is used to adjust the
1: SPF/RSPF
• The automatic exposure level
(Adjustment to
5 levels is
possible)
2: DOCUMENT
GLASS • For the procedure for
(Adjustment to
5 levels is
possible)
Explanation
margin width.
proportion of machine memory
used for printer mode.
whether or not holding down a
key causes repeated input of
the key. For keys that normally
cause a set value to increase
when held down (for example,
holding down the [
( ) or [ ] key (
program can be used to have
the set value not change when
the key is held down.
long a key must be pressed
for the input to be accepted.
By selecting a longer time,
you can prevent settings from
being changed by the
accidental pressing of a key.
signals. (p.68)
when a base setting is
selected. (p.68)
usage by about 10% when
copying. Toner save mode is
effective when the exposure
mode is AUTO or TEXT.
exposure level.
can be adjusted separately for
the document glass and the
RSPF.
adjusting the exposure and
guidelines for numeric values,
see page 28. The factory
default setting for the
exposure level is "center".
] key
)), this