NEC Versa VXi OP-220-73005 Installation Instructions

®
NEC Versa VXi
Hard Disk Drive
Congratulations on purchasing an NEC Versa VXi hard disk drive. Your new drive lets you take
advantage of the latest in high-capacity storage and superior drive organization while using a
compact notebook computer.
The NEC Versa VXi hard disk drive comes in the following models:
! 6-GB hard disk drive — Option Kit OP-220-73001
!
10-GB hard disk drive — Option Kit OP-220-73002
!
12-GB hard disk drive — Option Kit OP-220-73003
!
20-GB hard disk drive — Option Kit OP-220-73005
In addition to describing the features of the NEC Versa VXi hard disk drive, this document
describes how to remove and install a hard drive in the NEC Versa VXi computer.

Tools

You will need a small Phillips-head screwdriver to remove an existing drive and install your
NEC Versa VXi hard disk drive.

Removing a Hard Disk Drive

Before you install your new NEC Versa VXi hard disk drive, you must remove the existing hard
drive from your computer. Follow these steps to remove the existing hard disk drive.
Power off your computer. If the system is connected to an AC power source, disconnect it.
1.
Locate the drive access panel on the left side of the system. Open the panel using the notch.
2.
Opening the panel
A – Drive Access Panel B – Notch
NEC Versa VXi Hard Disk Drive 1