Advertisement
Quick Links
PROLiNK WNR1009 and WNR1010
• Connect a LAN cable from any LAN port from the WNR1009/1010 to your LAN
Port in your PC.
1) Open IE and access
password as password.
2) Go to Wireless Settings > Basic Settings > Mode: Change to "Client" > Apply
Changes > Reboot Later
3) Go to Site Survey > Click "Site Survey" > It will scan the list of wireless AP
available > Select your wireless AP SSID e.g. PROLiNK_H5004N > Next
http://192.168.123.254
Universal Repeater
and enter admin as username and
Setup Guide
Advertisement
Related Manuals for PROLiNK WNR1009
Summary of Contents for PROLiNK WNR1009
- Page 1 PROLiNK WNR1009 and WNR1010 Universal Repeater Setup Guide • Connect a LAN cable from any LAN port from the WNR1009/1010 to your LAN Port in your PC. and enter admin as username and 1) Open IE and access http://192.168.123.254 password as password.
- Page 2 AP SSID > Tick “Enable Universal Repeater Mode” > You can change the SSID of Extended Interface – this is the SSID you will see for your WNR1009/1010 when in repeater mode. Click “ Apply Changes” > Reboot Later...
- Page 3 6) To setup wireless security when in repeater mode, go to Security > Select SSID: make sure the Repeater AP is selected > Select WPA(TKIP) or WPA2(AES) as the Encryption Mode. Pre-Shared Key Format: Passphrase. Enter your desired password in Pre-Shared Key e.g. testing 123. The Pass Phrase entered must be a minimum of 8 characters.
Need help?
Do you have a question about the WNR1009 and is the answer not in the manual?
Questions and answers