Advertisement
2
Each of the cameras will confirm their
connection. Masters will confirm that they are
connected to the slave(s).
Select [OK] to confirm and exit the menu.
Slaves will confirm that they are
connected to the master camera.
Select [OK] to confirm and exit the menu.
How to Disconnect
When you have finished using Linked Shot
mode, return to the WFT settings menu to select
[Disconnect.]
How to Reconnect
To reconnect:
1. Begin with the same cameras you originally
set-up.
2. Set the master camera from [Disconnect] to
[LinkedShot].
3. Set all slaved cameras from [Disconnect] to
[LinkedShot].
© 2012 Canon U.S.A., Inc. All Rights Reserved. Reproduction in whole or in part without permission is prohibited.
5
Advertisement
