Advertisement
EOS Wireless File Transmitter
Linked Shot Setup
Overview
In Linked Shot mode one EOS WFT-equipped
camera is set up as the master with the remaining
WFT-equipped cameras set up as slaves. You can
connect up to 10 slaves. The master can trigger the
Master Camera Initial Setup
1
Turn on the camera with WFT unit attached.
Note that the WFT requires its own battery.
Press the MENU button on the camera, then
navigate to the Tool menu that lists WFT set-
tings. Select [WFT settings].
2
Under WFT settings, elect [Connection wizard].
3
Under Select communication method, select
[LinkedShot]. Select [OK].
slaves simultaneously or with intervals and/or de-
lays based on your preference and camera settings.
No other equipment or software is necessary.
2
Advertisement
