Related Manuals for Canon EOS Series
Summary of Contents for Canon EOS Series
- Page 1 Step-by-Step Setup Guide Wireless File TransmiTTer linked shoT mode © 2012 Canon U.S.A., Inc. All Rights Reserved. Reproduction in whole or in part without permission is prohibited.
- Page 2 EOS Wireless File Transmitter Linked Shot Setup Overview slaves simultaneously or with intervals and/or de- In Linked Shot mode one EOS WFT-equipped lays based on your preference and camera settings. camera is set up as the master with the remaining No other equipment or software is necessary.
- Page 3 Under Linked Shooting settings, select [Mas- ter]. Select [OK]. You should see the [Busy...] screen at right. Leave the master camera set to this screen while you continue to set up the slaves as described below. Slave Camera Setup Turn on the camera with the WFT unit attached. (The WFT requires its own battery.) Navigate to the Tool menu that contains the WFT settings menu.
- Page 4 Under Select communication method, select [LinkedShot]. Select [OK]. Under Linked Shooting settings, select [Slave]. Select [OK]. You should see the screen at right. Select [OK] to connect to the master camera. Repeat this five-step procedure for each additional slave you wish to link. Master Camera Final Setup The Linked Shooting settings screen on the master camera should look like the screen at...
-
Page 5: How To Disconnect
1. Begin with the same cameras you originally set-up. 2. Set the master camera from [Disconnect] to [LinkedShot]. 3. Set all slaved cameras from [Disconnect] to [LinkedShot]. © 2012 Canon U.S.A., Inc. All Rights Reserved. Reproduction in whole or in part without permission is prohibited.