Flash Down-Loading Method - Sony FWD-42PX2 Service Manual

2-5. Flash Down-loading Method

Preparation
1. Connect this unit with PC using the RS-232C cable.
2. Disconnect the AC power cord of this unit.
Download
1. Start the file, "FWD42PX2_Down.exe".
2. Select "COM1" as COM Port and "57600" as baud
rate as below picture.
3. Click the [Port|Setup], then click the [OK] button.
4. Click the [Load] button, then select the file from the
designated folder.
2-6
5. Click the [Run|DownLoad] button.
Download is started. (Down Load Time : about 5
minutes)
If down load is finished, the monitor will be re-booted
automatically.
m
. Do not remove AC cord from PC and monitor while
down load operation is being proceeded.
. After processing micom update with ISP program,
please execute following in order for the unit to
maintain "Shipping default condition".
* Execute EXCEPT WB in INITIALIZATION.
* Execute COPY WB DATA in WB DEFAULT
DATA.
* Execute INIT GOODS in FOR TEST.
FWD-42PX2