Installation Instructions For The Camera And Camera Mount - San-tron Clarifi User Manual

Installation instructions for the camera and camera mount

1. Fasten the screw of the mount into the screw hole on the top of the camera
(Refer to image 1 & 3). Then, screw down the black rotary knob (Refer to
image 2) and lock the camera in place.
2. Clean the area where the 3M VHB tape base of the camera mount will be
positioned.
3. After the camera is installed on the camera mount, peel off the 3M labeled
protective plastic from the base to expose the 3M VHB tape. Place the base
of the camera mount in its predetermined position. See the pictures below for
reference.
Image 1
Image 3
6 /16
Image 2