Table of Contents
Advertisement
Instructions with the button /interface /indicators
Name
Function
GPS Interface
GPS Signal input
1.For camera power
source.
USB Interface
2.Used to adjust the
view angle of
camera.
HDMI Interface
Full HD video output
Pressed button to
SOS Button
lock the files
1.Boot indication
2.Charging indication
Indicators
3.Recording
indication
TF Card Slot
Memory card slot
RESET
Reset function
Instruction
Connect the GPS module to the camera for GPS
signal
1. Connect the voltage transformer cable to supply
power to turn on the camera.
2. Connect the voltage transformer cable to supply
power to charge the camera.
3. Connect the unit to the computer with USB cable
to adjust the view angle for of the unit before fixing
the camera.
HDMI is for HD video output (default read-only）
Press SOS button under recording to lock the files
and protect them from cycle covering.
1. Blue indicator turns on means the battery is
charging, and when fully charged, the camera will
turn off.
2. Red indicator turns on when booting.
3. Red indicator flash when recording.
Insert the TF card to the card slot with the metallic
pins side towards the front of the camera. Then lock
the slot with the screw. Seal the screw with a "Clarifi"
fragile label to secure the TF card. (Authorized
personnel only）
When the red indicator stops flash during recording
and the unit crashes press the RESET button to
restart
5 /16
Hide quick links:
Advertisement
Table of Contents
