Specifications - NETGEAR GS105PE Installation Manual

Set Up the Switch Configuration Utility
Plus switches are plug and play. You can install a configuration utility to select
additional options to manage and customize the switch for your network. This utility
is on the resource CD that was shipped with the switch.
Note: The configuration utility is installed on your computer and is supported only
on Windows computers.
To install the configuration utility:
1. Insert the resource CD into a computer that is connected to the switch.
2. Click Install ProSAFE Plus Utility and follow the prompts to install the
program.
The switch configuration utility is installed in the program directory of your
computer and a ProSAFE Plus Utility icon is placed on your desktop.
To configure the switch:
1. Double-click the ProSAFE Plus Utility icon.
The configuration home screen displays a list of plus switches that it discovers
on the local network.
2. Select the switch that you want to configure.
You are asked to enter the password for the switch.
3. Enter the switch's password in the password field.
The switch's default password is password.
4. Use the utility to configure the switch.
For a description of plus features, see the ProSAFE Plus Switch Utility User
Guide. You can access the user guide through links on the Help tab of the utility
or on the resource CD.
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134 USA
PoE Pass Through
This switch supports PoE pass through. When the power LED is blinking green, it
means PoE pass-through is disabled because the input voltage to port 5 is less
than 45 VDC. When a PoE switch is connected to the PD port, power is passed
through the switch to the PSE ports. PSE port 1 is always given priority. Power
not consumed by the switch or a device connected to port 1 is supplied to port 2.
The following table describes the behaviour of the PSE ports.
Port 5 Connected Scenario
Device Type
IEEE802.3af PoE Device connected to
Switch or Injector port 1
IEEE802.3af PoE Device connected to
Switch or Injector port 2
IEEE802.3at PoE Device connected to
Switch or Injector port 1
IEEE802.3at PoE Device connected to
Switch or Injector port 2
IEEE802.3at PoE Device connected to
Switch or Injector port 1 and port 2

Specifications

Specification Description
Network interface RJ-45 connector for 10BASE-T, 100BASE-TX, or 1000BASE-T
Network cable Category 5e (Cat 5e) or better Ethernet cable
Ports 5
NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered
trademarks of NETGEAR, Inc. and/or its subsidiaries in the United States and/or other
countries. Information is subject to change without notice. © NETGEAR, Inc. All rights reserved.
July 2013
Specification
(Continued)
Power
Power consumption
Weight
Dimensions
(W x D x H)
Port 1 PD Class Port 2 PD Class
Type Support Type Support
Operating temperature
Class 1 or 2 NA
Operating humidity
Electromagnetic
NA Class 1 or 2
compliance
Safety agency
Class 0 or 3 NA
approvals
Support
NA Class 0 or 3
Thank you for selecting NETGEAR products.
Class 1 or 2 Class 1 or 2
After installing your device, locate the serial number on the label of your product and
use it to register your product at https://my.netgear.com.
You must register your product before you can use NETGEAR telephone support.
NETGEAR recommends registering your product through the NETGEAR website.
For product updates and web support, visit http://support.netgear.com.
NETGEAR recommends that you use only the official NETGEAR support resources.
For the current EU Declaration of Conformity, visit
http://support.netgear.com/app/answers/detail/a_id/11621/.
Description (Continued)
37-57 VDC, 600mA max@42.5V
21.95W maximum
0.47 Kg (1.04 lbs)
158 mm x 100 mm x 27 mm
(6.22 in. x 3.93 in. x 1.06 in.)
0–50° C (32–122° F)
10%–90% relative humidity, noncondensing
CE Class B, FCC part 15 Class B, VCCI Class B,
C-Tick Class B, CAN ICES-3 (B)/NMB-3(B)
CE mark