Parts Name and Function
Roll paper cover
Power switch cover
Power Switch
Turns the printer on or off. The marks on the switch: (
After turning on the printer, it takes about 30 seconds until the printer is ready for printing.
Before turning on the printer, be sure to check that the AC adapter is connected to
the power supply.
CAUTION
Power Switch Cover
Install the power switch cover that comes with the TM-T70-i onto the printer to prevent
inadvertent changing of the power switch, to prevent tampering, and to improve the appearance
of the printer.
To reset the printer when the power switch cover is installed, insert a long, thin object (such as
the end of a paper clip) into the hole in the power switch cover and press the power switch.
If an accident occurs with the power switch cover attached, unplug the power cord
immediately.
Continued use may cause fire or shock.
WARNING
Manual cutter
Chapter 1 Product Overview
Cover open lever
Control panel
Power switch
/
)
1
17