Bulbs - Honda NXR125 BROS KS Owner's Manual

Owner's Manual

Bulbs

(Refer to "Maintenance Precautions" on page 42.)

WARNING
The light bulb becomes very hot while the light is
on, and remains hot for a while after it is turned off.
Be sure to allow it to cool down before servicing.
ATTENTION
• • • • • Do not put fingerprints on the bulb. They may
create hot spots causing the bulb to burn out
prematurely.
• • • • • Wear clean gloves while replacing the bulb.
• • • • • If you touch the bulb with bare hands, clean it with
a cloth moistened with alcohol to prevent
premature failure.
NOTE
• Be sure to turn the ignition switch off before replacing
the bulb.
• Do not use bulbs other than specified.
• After installing a new bulb, check that the light
operates properly.
Headlight Bulb
1. Remove the two bolts (1) and the headlight case (2).
2. Remove the headlight (3).
(2)
(3)
3. Pull off the socket (4) without turning.
4. Remove the dust cover (5).
5. Remove the bulb (7) while pressing down on the pin
(6).
6. Remove the bulb without turning.
7. Install a new bulb in the reverse order of removal.
(1) Bolt
(2) Headlight case
(3) Headlight
(1)
65