Advertisement
Quick Links
1
Connect the Adapter to a PC or Modem/Router
1
Step
Get one MegaPlug AV
200 Mbps Ethernet Adapter from
the box.
2
Step
Get one Ethernet Cable.
3
Step
Plug one end of the
Ethernet Cable into the Ethernet
Port on the bottom of the
MegaPlug Adapter.
Note: An Ethernet port looks similar to a phone port but is slightly larger.
Questions? Call 1-888-436-0657 (USA)
4
Step
Plug the MegaPlug
Adapter into a Power Outlet.
Do NOT plug the Adapter into a
power strip or wall outlet that uses
surge protection as the Adapter
may not work.
5
Step
Plug the other end of the
Ethernet Cable into an OPEN
Ethernet Port on your Modem or
Router.
6
Step
Repeat Steps 1-5 for a
computer or an Internet device.
Flip this Quick Start Guide over to continue
Questions? Call 1-888-436-0657 (USA)
Broadband
Router
NEXT
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for ActionTec MegaPlug AV
Summary of Contents for ActionTec MegaPlug AV
- Page 1 Connect the Adapter to a PC or Modem/Router Step Plug the MegaPlug Step Adapter into a Power Outlet. Get one MegaPlug AV 200 Mbps Ethernet Adapter from Do NOT plug the Adapter into a the box. power strip or wall outlet that uses surge protection as the Adapter may not work.
-
Page 2: Quick Start Guide
MegaPlug™ AV 200 Mbps they may be added by following the same steps in this guide. Ethernet Adapters. Connect the Adapter to a PC or Modem/Router www.actiontec.com/howto You will need the following items: • Two MegaPlug™ AV 200 Mbps Ethernet Adapters •...
Need help?
Do you have a question about the MegaPlug AV and is the answer not in the manual?
Questions and answers