Table of Contents
Advertisement
BASIC CONNECTIONS
.,.,.. .
Selecting TV system
Before connecting,
be sure the TV SYSTEM switch (rear of the unit) setting corresponds
with your local TV system (NTSC or PAL).
)
Connecting
to a TV
Connect the DVD cdayer to your TV. This is the easiest way to hook LIDthe DVD player.
DVD player
@
@
:
QQNsysTEMQ\
~
[
•@@@~f3m@
-1'1"
-
—.
(Red)
(White)
n
To an AC outlet
(Yellow)
Audio/Video
cable
To audio irmuts (White)
TV with AudioNideo
input sockets
,.,
Notes on connections
.
Please refer to the instruction manuals with the Audio system and TV.
When you connect the DVD player to your TV and other equipment,
be sure to turn off the power and disconnect all of the equipments from
the wall outlet until all the connections
have been made.
.
If your TV has the S-video input socket, connect the DVD player with
a S-video cable (not supplied). You can enjoy clearer picture play.
.
If your TV has one audio input socket, connect the DVD player to a Y
cable adapter (not supplied) and then connect it to the TV.
Do not connect the DVD player to aVCR directly. The playback picture
will be distorted because DVD discs are copy protected.
Please consult your local audio/video
dealer for more details.
The DVD player is not completely disconnected
from the mains when
the WON button is set to the u position.
Headphones
Connect stereo headphones
(not supplied) to the PHONES socket for
monitoring or for private listening.
Set the PHONE
LEVEL
control
to MIN before
connecting
the
headphones.
Use the PHONE LEVEL control to adjust the volume of the headphones.
~———————————
–
1 If your TV has the component
video input sockets, connect the DVD
player to these sockets as shown below, instead of the VIDEO OUT or
I S-VIDEO OUT sockets. You can enjoy high quality picture playback.
L—
(
(Green) (Blue) (Red)
(Green) (Blue) (Red)
'@L-
Component
video cable (not supplied)
I
— — — — — — — ——
——
——
——
——
-1
/,
4
Advertisement
Table of Contents
