Hardware Overview; Led Indicators - Axis P3354 User Manual

AXIS P3354

Hardware Overview

NOTICE
To prevent corruption of recordings, the SD card should be unmounted before removal. To unmount, go to Setup > System
Options > Storage > SD Card and click Unmount.
Control button - The control button is used for:
• Connecting to an AXIS Video Hosting System service. See
1 second until the Status LED flashes green.
• Connecting to AXIS Internet Dynamic DNS Service. See
about 3 seconds.
• Resetting the product to factory default settings. See

LED Indicators

LED
Color
Network
Green
Amber
Unlit
Status Green
Amber
Red
Power Green
Amber
Note
• The Status LED can be configured to be unlit during normal operation. To configure, go to Setup > System Options >Ports
& Devices >LED. See the online help for more information.
• The Status LED can be configured to flash while an event is active.
• The Status LED can be configured to flash for identifying the unit. This can be done under Setup > System Options >
Maintenance.
Indication
Steady for connection to a 100 MBit/s network. Flashes for network activity.
Steady for connection to a 10 MBit/s network. Flashes for network activity.
No network connection.
Steady green for normal operation.
Steady during startup and when restoring settings.
Slow flash for failed upgrade.
Normal operation.
Flashes green/amber during firmware upgrade.
page 38 . To connect, press and hold the button for about
page 38 . To connect, press and hold the button for
page 44
.
5