Events - Axis P3354 User Manual

AXIS P3354

Events

Events
The Axis product can be configured to perform actions when different events occur, for example, start a recording when motion is
detected. The set of conditions that defines how and when the action is triggered is called an Action Rule.
Available Action Rule triggers and conditions include:
Applications — use installed applications to trigger the rule, see
•
Detectors
•
Day/Night Mode — trigger the rule when the product switches between day mode (IR cut filter on) and night
-
mode (IR cut filter off). This can for example be used to control an external infrared (IR) light connected
to an output port.
- Motion Detection — trigger the rule when motion is detected, see
Tampering — trigger the rule when tampering is detected, see
-
• Hardware
Network — trigger the rule if network connection is lost or restored. This can for example be used to start
-
recording to the SD card.
Temperature — trigger the rule if the temperature falls outside or inside the operating range of the product. This
-
can for example be used to send maintenance notifications.
Input Signal
•
Manual Trigger — trigger the rule using the Manual Trigger button in the Live View page, see
-
Live View Page, on page 8
and configuration.
PTZ
•
Moving — trigger the rule when the camera view moves due to a PTZ operation. This can for example be used
-
as an additional condition to prevent an action rule triggered by motion detection to record video while the
camera view moves due to a PTZ operation.
- Preset Reached — trigger the rule when the camera stops at a preset position. This can be for example be used
with the Send Images action to upload images from the preset position.
• Storage
Available — trigger the rule when the storage device is unmounted or removed. This can for example be
-
used to send maintenance notifications.
Full — trigger the rule when the storage device is full. Under normal operation, the oldest recordings will be
-
overwritten to prevent the storage device from becoming full.
Locked — trigger the rule if the storage device is locked (write protected).
-
System
•
System Initializing — trigger the rule when the product is being started. This can for example be used to send a
-
notification when the product restarts.
• Time
Recurrence — trigger the rule periodically, see
-
upload an image every 5 minutes.
Use Schedule — trigger the rule according to the selected schedule, see
-
Applications, on page 27
. This can for example be used to validate actions during product installation
Recurrences, on page 30
28
.
Motion Detection, on page 24
Camera Tampering, on page 24
. This can for example be used to
Schedules, on page 30
.
.
Controls on the
.