Table of Contents
Advertisement
Instructions for use
GB
English
XWA 71283
WASHING MACHINE
Contents
Installation, 14-15
Cutting off the water or electricity supply
Disposal
and starting a wash cycle, 18-19
Wash cycles, 20
Push & Wash
Personalisation, 21
Detergent dispenser drawer
Troubleshooting, 23
Service, 24
GB
13
Advertisement
Table of Contents
Troubleshooting
Related Manuals for Indesit XWA 71283
Summary of Contents for Indesit XWA 71283
-
Page 1: Table Of Contents
Checking the water inlet hose Precautions and tips, 17 General safety Load balancing system Disposal Description of the washing machine XWA 71283 and starting a wash cycle, 18-19 Control panel Indicator lights Starting a wash cycle Wash cycles, 20 Push & Wash... -
Page 2: Installation
Installation ! This instruction manual should be kept in a Levelling the machine correctly will provide safe place for future reference. If the washing it with stability, help to avoid vibrations and machine is sold, transferred or moved, make excessive noise and prevent it from shifting sure that the instruction manual remains with while it is operating. -
Page 3: The First Wash Cycle
The free end of the hose should Technical data not be underwater. Model XWA 71283 width 59.5 cm ! We advise against the use of hose extensions; Dimensions height 85 cm if it is absolutely necessary, the extension must... -
Page 4: Care And Maintenance
Care and maintenance Cutting off the water and electricity Cleaning the pump supplies The washing machine is fitted with a self- • Turn off the water tap after every wash cycle. cleaning pump which does not require any This will limit wear on the hydraulic system inside maintenance. -
Page 5: Precautions And Tips
Precautions and tips Disposal This washing machine was designed and constructed in accordance with international safety regulations. The fol- • Disposing of the packaging materials: observe local lowing information is provided for safety reasons and must regulations so that the packaging may be re-used. therefore be read carefully. -
Page 6: Description Of The Washing Machine And Starting A Wash Cycle
Description of the washing machine and starting a wash cycle Control panel WASH CYCLE PROGRESS FUNCTION indicator lights buttons with indicator lights DOOR START/PAUSE ON/OFF LOCKED button with indicator button indicator light light WASH CYCLE DELAY TIMER Detergent dispenser drawer TEMPERATURE knob button... -
Page 7: Indicator Lights
Indicator lights Wash cycle phase indicator lights Once the desired wash cycle has been selected and has be- gun, the indicator lights switch on one by one to indicate which The indicator lights provide important information. phase of the cycle is currently in progress. This is what they can tell you: Wash Delayed start... -
Page 8: Wash Cycles
Wash cycles Push & Wash This function allows for starting a wash cycle even when the machine is switched off without having to press the ON/OFF button in advance, or after switching on the machine, without having activated any button and/or selector (otherwise, the Push &... -
Page 9: Personalisation
Personalisation Setting the temperature Press the TEMPERATURE button to set the wash temperature (see Table of wash cycles). The temperature may be lowered, or even set to a cold wash . The washing machine will automatically prevent you from selecting a temperature which is higher than the maximum value set for each wash cycle. ! Exception: if the 8 programme is selected, the temperature can be increased up to a value of 90°C. -
Page 10: Detergents And Laundry
Detergents and laundry Detergent dispenser drawer Synthetics fabrics or mixed loads should be washed at 40°, and resistant cotton fabrics at 60°. Successful washing results also depend on the correct dose of Delicate: use programme 4 to wash very delicate garments. detergent: adding too much detergent will not necessarily result It is advisable to turn the garments inside out before washing in a more efficient wash, and may in fact cause build up on the in-... -
Page 11: Troubleshooting
Troubleshooting Your washing machine could fail to work. Before contacting the Technical Assistance Centre (see “Assistance”), make sure that the problem cannot be solved easily using the following list. Problem: Possible causes / Solutions: • The appliance is not plugged into the socket fully, or is not making contact. The washing machine does not switch on. -
Page 12: Service
This information can be found on the data plate applied to the rear of the washing machine, and can also be found on the front of the appliance by opening the door. Indesit Company Spa Viale Aristide Merloni, 47 60044 Fabriano (AN) Italy www.indesit.com...