Cateye Volt 6000 HL-EL6000RC Manual page 7

HOW TO MOUNT TO A BICYCLE
(3/3)
6
Ring
Plug
Connect the plug so that the directions of the arrow
and the
ring, and then pull out the plug.
8
Control unit
mark match. To remove the plug, hold the
Top tube
Pull tightly
Fixing strap
Control unit
7
Unlock
Lock
Knob
Set the knob of the control unit to the "Unlock" position, align the battery unit with the position
alignment mark, and then slide the battery unit into place.
CAUTION!: After you connect the battery unit, be sure to set the knob back to the "Lock"
position to lock the battery unit in place.
To remove the battery unit, set the knob to the "Unlock" position, and then pull out the battery unit.
9
Insulation
sheet
(WSW-001)
Check that the light turns on when you press the remote control
switch near the control unit.
CAUTION!: Do not look directly at the light when it is on.
Position alignment mark
Battery unit
Slide
Rubber band
6