Hyundai DVBT218PVR Instruction Manual page 52

note: The default is oFF, set this option to on only if this STB is connected to an active anten-
na which amplifies the received RF signal, otherwise please set it to oFF .
2.2.1.2 country setting
Set the country for auto scan, manual scan and time zone.
note: Change the country setting will automatically change the default time zone and set
the default Frequency and bandwidth for auto scan.
2.2.1.3 osD language
Set the On Screen Display Language.
2.2.1.4 audio language
Set the audio language for watching program.
2.2.1.5 subtitle language
Set the language for displaying subtitle.
2.2.1.6 lcn
Set the Logical Channel Number to on or off.
note: lcn is a number that uniquely identifies a logical channel, which is popular in some euro-
pean countries such as England, France.
2.2.1.7 auto standby
Set the 3 hours auto standby on or off.
2.2.1.8 auto time zone / time zone
Allow you to enable or disable auto time zone offset update. If you know the GMT(Greenwich
Mean Time) time zone offset of your location,set the auto time zone to oFF and select an
appropriate time zone, otherwise set it to on and let the system update the time zone automa-
tically according to the transport stream.
note: Some Countries are covered with more than one Time Zone.
2.2.1.9 auto scan
Press <RED> button to start auto scan. See section 1.2.1 for details.
2.2.1.10 manual scan
Press <GREEN> button to start manual scan. See section 1.2.2 for details
2.2.2 tv setup
Setup the display mode for TV. See Figure 5.
Figure 5. TV Setup Figure 6. Video Enhancement
EN - 52