Front And Rear Panel Illustration - Hyundai DVBT218PVR Instruction Manual

Front anD rear panel illUstration

1. Front panel
1. standby indicator: Used to visually show power state of the set top box, the green LED
will show if turned on the set top box and the red LED will be light if the set top box entered
standby mode.
2. remote control sensor: Used to receive the signal from the remote control.
3. Usb jacK: Used to connect to an external USB 2.0 device.
2. rear panel
1. rF in: This socket connects to your external aerial.
2. rF loop throUgh: This socket will bypass the RF signal to either your TV or another
video system.
3.
vcr scart: This socket connects to either a DVD or other video system.
4. tv scart: This socket connects to your TV.
coaXial: This socket connects to a coaxial socket on your surround sound system.
5.
6. mains cable: This is used to connect to your main power supply.
R R F F
R R F F IN IN
THROUGH THROUGH
LOOP LOOP
VCR O O VCR O O TV TV
EN - 46
100-240V~
50/60Hz
Digital
Audio
Coaxial