Product Update - Reliable Equipment LR 88.5 Operator's Manual

In an effort to provide our customers with unbeatable customer support, updates
will be sent out to inform you of product enhancements which may improve the
performance of your tool from RELIABLE EQUIPMENT.
TOOL:
PROCEDURE:
PURPOSE:
DIRECTIONS:
1 Remove chain cover from motor assembly.
2 Center chain adjuster on chain adjusting screw.
NOTE:
3 Advance adjusting screw fully.
Remember to
follow safe work
4 Align a centerpunch as close as possible to the
practices.
5 Turn the bolt 1/2 turn and repeat step 4.
6 Re-assemble and adjust bar and chain as needed.
A
CONTACT RELIABLE EQUIPMENT WITH ANY QUESTIONS REGARDING THIS UPDA TE.

PRODUCT UPDATE

See Figure 6, Page 17
LR SERIES - LONG REACH CHAINSAWS
STAKING
This simple procedure will prevent the adjustment screw from
loosening and possibly dropping out due to extensive vibration.
exposed end of the bolt, and tap with a hammer
spreading the thread. (Refer to photo A below)
All future saw orders will feature
a revised adjusting screw (B) with
rubber lock-ring as well as staking.
(Shown at right )
22
B