Introduction Thanks for purchasing this product from ProtelX. Please read instructions carefully before use and store in a safe place for future reference. Unpacking 1. Remove packing material and set the unit on a flat, supportive surface. Make sure to remove additional items from packaging.
Control Buttons Turntable AUX-IN Record Turntable Mode Press this button to switch between turntable, USB and aux in mode. Play vinyl record through built-in speakers. Press to STOP music playing in USB USB Mode mode.Press to STOP vinyl recording in Record mode.
Turntable Mode 1. Connect the small DC jack into the DC-IN port. 2. Connect the plug to a mains outlet. 3. Place the vinyl record on to your turntable. 4. Set the correct speed (rpm) of your vinyl record (33/45/78rpm) 5.
USB Play Mode 1. Switch the mode button to USB play mode, the red LED indicator is ON. 2. Plug the USB disk to the USB slot. 3. Press play button to start playing USB disk’s music. 4. You can play own mp3 music or recorded vinyl music. Vinyl Record Mode 1.
Replace Stylus The turntable’s stylus needs to be replaced every 3-4 months after continuous playing. To buy replacement stylus, go to www.gporetro.com to order. Troubleshooting 1. No power to device? Make sure your turntable is connected to power. Make sure that you have turned the power dial far enough around.
Product Care DO NOT leave vinyl records on the turntable after use. Return the vinyl record to its original packaging and store. Return the tone arm to it's original place after use and secure with small needle arm lock. Replace the protective cap of the stylus cartridge after use.
Need help?
Do you have a question about the Attaché and is the answer not in the manual?
Questions and answers