Introduction Thanks for purchasing the GPO Bermuda. You are now the proud owner of a British design classic, based on the legendary Dansette Bermuda which graced homes the length and breadth of the country. To get the most from your new turntable, please read these instructions carefully before use, and store them in a safe place for future reference.
Page 5
4. Open the lid of the unit. 5. Remove the black tie-wrap from the tone arm. 6. Remove the white stylus protective cap. 7. Release the tone arm’s needle arm lock. 8. Connect the small DC jack into the power input socket at the rear of the unit.
Control Buttons Select Mode: To select the Turntable, USB or AUX-IN mode, gently twist the control knob on the front of the unit to the position indicated. The indicator light on the side of the unit will illuminate to confirm the selected mode.
Turntable Mode 1.Ensure that the unit is correctly unpacked and set up as described in the Unpacking section 2. Place your chosen vinyl record onto your turntable 3. Set the correct speed (rpm) of your record (either 33rpm, 45rpm or 78rpm) 4.
AUX-IN Play Mode 1. Ensure that the unit is correctly unpacked and set up as described in the Unpacking section 2. Connect your external audio source (smartphone, tablet device, MP3 player, etc) to the AUX-IN socket on the side panel. 3.
6. Press once to record the whole vinyl as one track, and press twice to split the tracks. RCA Audio Out You can connect extra speakers to the GPO Bermuda using the RCA audio cable provided. The relevant Audio Out slots are located on the rear of the unit.
Replace Stylus The turntable’s stylus will need to be replaced every three to four months to continue playing vinyl. Replacement styluses can be ordered from www.gporetro.com. Replacement instructions are given here:...
Troubleshooting Q) The unit will not turn on A) Ensure that the DC cable is properly connected to the unit and plugged in to a working outlet. Ensure that the power dial has been turned far enough clockwise. Q) The speaker is making noises A) Make sure that your vinyl record is not damaged or warped.
Product Care • DO NOT leave vinyl records on the turntable after use • Store vinyl records in their original packaging • Return the tone arm to the rest position after use, and secure with the small needle arm lock •...
Need help?
Do you have a question about the BERMUDA and is the answer not in the manual?
Questions and answers