TP-Link TL-WA850RE Manual page 13

For more information about using WPS on your router,
please refer to the router manufacturer's user guide.
2)
Immediately press the RE button on your extender. The
should change from flashing to solid, showing that WPS connection is
successful.
Relocate
3
Plug the extender into an electrical outlet about halfway between your
router (Host Network) and the Wi-Fi dead zone.
Wait until the
is in a location with 3 or more LEDs lit. If not, relocate the extender closer
to the router to achieve a good (or better) signal quality.
LED
Enjoy!
The extender shares the same wireless network name (SSID) and wireless
password as your router.
change from flashing to
If the RE LED does not

please refer to Using your Web Browser.
Some ISP gateways disable the WPS function by

default, if the WPS method fails, please refer to
your Web Browser.
(Signal Strength) LEDs are lit. Make sure the extender
solid,
Using
6
Introduction