UCView View Media 50 Installation Manual

View Media 50 Player Installation Manual
Thank you for purchasing the UCView View Media 50 player. Please match the items on the list
below with the items in the box. If any item is missing or damaged, please contact your UCView
Media Networks sales representative immediately.

One (1) View Media 50 player

One (1) Power supply

One (1) Cable cord

One (1) Antenna

Installing your VM 50 Player:

1) Remove packaging - make sure box and plastic casings are stored away in case a
return is necessary.
2) Plug-in the LAN/Ethernet cable into the VM 50 player.
3) Plug-in your video source, HDMI or DVI cable, into the VM 50 player and the monitor.
4) Plug-in the Power cable into the VM 50 player.
5) Attach the antenna, which is included in your package, to your VM 50 player.
LAN/Ethernet
HDMI
capable of transmitting high-definition video and high-resolution audio.
DVI
signal.
VGA
computer to a monitor.
LAN/Ethernet:
network, such as PCs and routers.
HDMI
(High-Definition Multimedia Interface): A single cable which is
(Digital Video Interface): A cable which is capable of providing digital video
(Video Graphics Array): An analog cable which enables connection from your
A LAN/Ethernet cable can connect to devices over a local area
18425 Napa St. Northridge, CA 91325
DVI Power
www.ucview.com
1-818-772-8255