Setting Watering Start Times; Eliminating A Program Start Time; Programming The Controller - Hunter 600i Owner's Manual And User's Manual

PROGRAMMING THE CONTROLLER (Continued)..............................................................
6. Hours will be flashing.
Press the or button
to change the hour shown
on the display. Press the
to proceed to setting the
minutes.
7. Minutes will be flashing.
Use the or button to
change the minutes shown on
the display. The date, day and
time have now been set and
the dial may be returned to the
RUN position.

Setting Watering Start Times

1. Turn the dial to the SET
WATERING START TIMES
position.
2. The factory preset is set on
program A. If necessary, you
can select program B or C by
pressing the button.
3. Use the or button to
change the start time.
(The start times advance in
15 minute increments.)
Hold either button down for 1
second to change times rapidly.
4. Press the button to select the
next start time, or press
the next program.
18
STATION RUN TIME
PROGRAM
START
TIMES
SUN MON TUES WED THUR FRI SAT EVEN/ODD
STATION RUN TIME
PROGRAM
START
TIMES
SUN MON TUES WED THUR FRI SAT EVEN/ODD
SET WATERING
START TIMES
STATION RUN TIME
A
PROGRAM
B
C
1
START
2
TIMES
3
4
SUN MON TUES WED THUR FRI SAT EVEN/ODD
for
YEAR
NOTE: One start time will activate all stations
MONTH
DAY
RUNNING
sequentially in that program. This eliminates the
AM
PM
need to enter each station's start time. Multiple
24 HR.
start times in a program can be used for separate
morning, afternoon, or evening watering cycles.
YEAR

Eliminating a Program Start Time

MONTH
DAY
RUNNING
With the dial set to the SET WATERING START TIMES position, push the
AM
PM
or button until you reach 12:00
24 HR.
button once to reach the OFF position.
NOTE: If a program has all four-start times turned
off, then that program is off. (All other program
details are retained). Because there are no start
times, there will be no watering with that program.
This is a convenient way to stop watering on one
program only without turning the dial to the OFF
position.
YEAR
MONTH
DAY
RUNNING
AM
PM
24 HR.
(Midnight). From here push the
AM