Video Back-End Processor (Trident) - Sharp LC-32LE511E Service Manual

6. VIDEO BACK-END PROCESSOR (Trident)

PNX5120EH
a) General Description
The PNX5120EH is an advanced video picture improvement IC and the world's first solution,
NXP's Motion Accurate Picture Processing (MAPP), to combine movie judder cancellation,
motion sharpness and vivid color management in a single device. Aimed primarily at digital
and hybrid flat panel televisions in the mid-end and high-end European,Asian and U.S.
consumer markets, it complies with relevant industry standards.LCD TVs represent a huge
and growing market, and the PNX5120EH offers manufacturers a unique combination of
richer color, dynamic motion, sensational sharpness, deep contrast, and full HD resolution.
Moreover, you can easily tailor that balance via the Automatic Picture Control tool (delivered
by NXP as part of a separate System Design-in Toolkit) to meet your own image quality
requirements.
b) Features
x Single 27 MHz crystal clock input for all internal generated clocks
x Three TriMedia TM3271 400 MHz, 32-bit VLIW media-processing cores with:
o five instructions per clock cycle
o 32 kB instruction cache
o 64 kB data cache
x Integrated DDR2 SDRAM controller, 32-bit wide, up to 366 MHz clock (DDR2-800),
supporting 32 MB, 64 MB, 128 MB, and 256 MB single-rank memory configurations
x Separately licensed, the PNX5120EH comes with an easy-to-use System Design-in
Toolkit (SDT), which includes the NXP Picture Quality Tuning Tool, firmware image
containing the NXP proprietary Picture Improvement features, and GPL-licensed U-
Boot Bootloader software.
x DDR2-400 to DDR2-800 data rates supported
x PCI/XIO (V2.2) operating at 33 MHz
x Two UARTs
x Two I2C DMA interfaces (100 kHz/400 kHz); the second I2C can be used as a
debugging interface
x 16 GPIO pins
x Five PWM outputs
x Support for 8-bit NOR flash up to 64 MB
x Support for 8-bit/16-bit NAND flash up to 128 MB
c) PNX5120EH - Block Diagram
22
39
LC-32LE511
LC-40LE511
LC-40LE531
LC
LC
LC