Troubleshooting - Hotpoint ARMXXD 109 Instructions For Use Manual

Troubleshooting

see “Assistance”
GB
Problem:
Possible causes / Solutions:
The washer dryer does not
switch on.
The wash cycle does not start.
see “How to run a wash cycle or a drying cycle”).
The washer dryer does not take
in water (the text "NO WATER,
CHECK SUPPLY" appears
on the display).
The washer dryer continuously
takes in and see “Installation”)
drains water. see “Installation”)
The washer dryer does not drain
or spin. see “Wash cycles and functions”
see “Wash cycles and functions”
see “Installation”)
The washer dryer vibrates a lot see “Installation”)
during the spin cycle. see “Installation”)
see “Installation”)
The washer dryer leaks. see “Installation”)
see “Care
and maintenance”)
see “Installation” .
The machine is locked and the
display flashes, indicating an
error code (e.g. F-01, F-..).
There is too much foam.
The washer-dryer does not dry.
OFF
11