Advertisement
2-1. Rear Cover Removal
=>
=>
Remove the rear cover fixing screws indicated. Take care
when removing the rear cover not to damage the speaker
cables [Disconnect the speaker connector] as speakers are
fitted inside the rear cover.
2-2. Chassis Removal and Refitting
To remove lift the main bracket rear slightly and slide the
chassis away from the beznet. Ensure that the interconnecting
leads are released from their purse locks to prevent damage
being caused.
SECTION 2
DISASSEMBLY
<=
<=
=>
<=
15
2-3. N Board Removal
To remove the N Board first pull the shield case shown
vertically. The clip circled can then be released and the board
gently removed.
When refitting the chassis ensure that the main
bracket is located in the beznet guide slots before
sliding the chassis forwards. Refit the
interconnecting leads in their respective purse locks.
Shield
Case
Clip
Advertisement
