Table Of Contents - Kenwood RXD-402 Service Manual

RXD-402/452/502/552/572S/A41/A51
CONTENTS / ACCESSORIES / CAUTIONS
Contents
CONTENTS/ACCESSORIES/CAUTIONS...................2
EXTERNAL VIEW/DISASSEMBLY FOR REPAIR.......3
BLOCK DIAGRAM .......................................................4
CIRCUIT DESCRIPTION .............................................5
ADJUSTMENT .......................................................... 10
WIRING DIAGRAM ....................................................14
Accessories
FM indoor antenna (1)
(T90-0836-05)
Batteries (R6/AA) (2)
Remote control unit (1)
(A70-1262-05): TEQE1...RC-552E
Remote control unit (1)
(A70-1253-05): KPMXYM1...RC-552
System configuration
SYSTEM MAIN UNIT SPEAKER DESTINATION
XD-402 RXD-402 LS-N402 KPET
XD-402E RXD-402E LS-N402 E1
XD-402W RXD-402W LS-N402 Q
XD-452 RXD-452 LS-N452 MXYTE
XD-452E RXD-452E LS-N452 E1
XD-452W RXD-452W LS-N452 Q
2
AM loop antenna (1)
(T90-0837-05)
Speaker cords (2)
(E30-5535-05)
Provided in the speaker package
SYSTEM MAIN UNIT SPEAKER DESTINATION
XD-502 RXD-502 LS-N502 KPE
XD-502E RXD-502E LS-N502 E1
XD-502W RXD-502W LS-N502 Q
XD-552 RXD-552 LS-N552 MXYTE
XD-552E RXD-552E LS-N552 E1
XD-552W RXD-552W LS-N552 Q
XD-572S RXD-572S LS-N552 M1
XD-A41 RXD-A41 LS-N452 KP
XD-A51 RXD-A51 LS-N552 KP
PC BOARD ................................................................15
SCHEMATIC DIAGRAM ............................................23
EXPLODED VIEW .....................................................44
PARTS LIST...............................................................48
SPECIFICATIONS .....................................................59
AC plug adaptor (1)
(E03-0115-05)
Use to adapt the plug on the power cord to
the shape of the wall outlet.
(Accessory only for regions where use is
necesary.)
Cautions
Operation to reset
The microcomputer may fall into malfunction (impos-
sibility to operate, erroneous display, etc.) when the
power cord is unplugged while power is ON or due to
an external factor. In this case, execute the following
procedure to reset the microcomputer and return it to
normal condition.
Unplug the power cord from the power outlet
then, while holding the ENTER key depressed,
plug the power cord again.
(Main unit only)
ENTER
÷ Please note that resetting the microcomputer clears
the contents stored in and returns and to condition
when it left the factory.