Kenwood RXD-402 Service Manual page 6

Mini hifi component system
Hide thumbs

Advertisement

RXD-402/452/502/552/572S/A41/A51
3-1-4 Basic operation in test mode
(1) The muting during mode selection is not controlled in
the test mode.
(2) The test mode is cancelled when the AC power is
turned off.
(3) The operation of the keys in the test mode as follows.
3-1-5 The operation of the keys in the test mode
(1) DISPLAY /DEMO key
When this key is pressed in the test mode, all the flu-
orescent display indicators and leds light off and nor-
mal display are indicated cyclically.
(2) REV.MODE,DOLBY NR,A/B,REC/ARM keys
The volume level settings can be made as follows.
REV.MODE • • • volume min+1step
DOLBY • • • • • • volume 14 *RXD-402(TAPE E.Q.)
A/B • • • • • • • • • volume20
REC/ARM • • • • volume max (50)
(3) DISC SKIP key
With the selector on TUNER, the S level indication
changes cyclically as follows by pressing the [DISC
SKIP] key.
1 ATT is switched off. "ATT off & TUNER S level
XX"
2 ATT is switched on. "ATT on & TUNER S level
XX"
3 ATT is switched off. Normal display.
XX means A/D value(HEX) of S.
(4) DECK STOP key
With the selector on TUNER, when the [DECK STOP]
key operated, the preset memory can be changed as
10 steps.
10
(5) FWD PLAY/RVS key
With the selector on TUNER, the P. CALL is operated
by pressing the [ FWD PLAY] and [ RVS PLAY] keys.
FWD PLAY key • • • • P. CALL up
RVS PLAY key • • • • P. CALL down
(6) CD OPEN /CLOSE key
With the selector on TUNER, the channel space set-
tings can be made cyclically by pressing the [CD
OPEN/CLOSE] key with M version.
(7) DECK STOP key
With the selector on AUX, when the [DECK STOP ]
key operated,the S. direct (ON/OFF) can be changed.
(8) DISC 1 key
With the selector on something other than TUNER,
whenever the [DISC1] key is pressed, the setting of
E.Q changes cyclically as follows.
E.Q MAX
(9) DISC 2 key
With the selector on AUX, MD/DVD input level can be
made cyclically by pressing the [DISC 2] key .
INITIALIZED VALUE íî LEVEL MAX
6
CIRCUIT DESCRIPTION
20
30
40
00( )
E.Q MIN
E.Q FLAT
(10) DISC 3 key
With the selector on AUX, the balance level setting
can be made cyclically by pressing the [DISC 3] key .
Lch MAX
(11) DISC SKIP key
With the selector on something other than TUNER,
the muting (ON/OFF) can be changed.
3-2 Test mode of cassette deck
3-2-1 Setting of the test mode
While pressing the [deck play] key, put the plug into an
AC power outlet.
3-2-2 Canceling of the test mode
Unplug an AC power cord from an AC power outlet.
3-2-3 Condition in test mode
(1) Initial condition
• DOLBY-0FF
• AUDIO-MUTE OFF
(2) Mechanism SW detection
DISPLAY
A pack SW
A -CRO2
PROG.12
B-FWD
O.T.T
B pack SW
AUTO
B-CRO2
B-RVS
ANTENNA
(3) 4-sec recording
If the REC key is pressed, the system record for 4
sec. Then, it rewinds to the recording starting position
and plays back automatically.
If the REC key is pressed, during the 4-sec recording
operation, the system records further for 4-sec, then
return to the starting position of the first 4-sec record-
ing operation and plays back.
3-3 Test mode of CD player
3-3-1 Setting of the test mode
While the pressing the [PLAY/PAUSE] key, put the plug
into an AC power outlet.
3-3-2 Canceling the test mode
Press the stop key on stop mode or unplug the AC cord
from an AC power outlet.
3-3-3 The operation of the keys in the test mode.
K E Y
DISPLAY
PLAY/PAUSE
CD TEST
+AC IN
STOP
0
03 --:--
PLAY/PAUSE
05**:**
DOWN
FINISH
07 EF/FB
08 TG/FG
DISC3
09 TE/RF
10 TE/VC
DISC2
216**:**
DISC1
Rch MAX
CENTER
E.Q
ST
OPERATION
• Setting of the test mode.
• Tray 1/3 rotation.
• Tray opens automatically.
• Tray closes.
• Change or cancel the test mode.
• Tray closes/disc clamps.
• T-servo off(03) or on (05).
• Tray 1/3 rotation.
• Mechanism stops when the
automatic adjustment is finished.
• Display changes cyclically.
• If NG, display blinks up.
• Tray closes.
• Disc2 clamps.
• Plays track 16.
• Tray closes/disc clamps.
• Plays track 32.

Hide quick links:

Advertisement

loading

  Also See for Kenwood RXD-402

  Related Manuals for Kenwood RXD-402

Table of Contents