Subscribe to Our Youtube Channel
Related Manuals for Lightwave LW301
Summary of Contents for Lightwave LW301
- Page 1 Version 2.1 Plug-in Dimmer Socket Kit Model No. LW301 Instruction Manual Connect Series www.lightwaverf.house...
- Page 2 EC DECLARATION OF CONFORMITY Responsible Authority: LightwaveRF PLC, Innovation Campus Birmingham Faraday Wharf Holt Street Birmingham B7 4BB Tel: +44 (0)121 250 3625 Email: enquiries@lightwaverf.com Model Number(s): JSJSLW301 Description: Plug-in Dimmer Kit Directives this equipment Complies with: 2006/95/EC The Low Voltage Directive N/A 2004/108/EEC The Electromagnetic Compatibility Directive 1999/5/EC R&TTE Directive 93/68/EEC CE Marking Directive...
-
Page 3: How Do I Get Started
(up to 300W) to be turned on and o dimmed using the remote control included in this pack, or by using a smartphone / tablet (requires the Lightwave Link). Help video & further guidance For additional guidance, and to watch a video... -
Page 4: Device Setup
Device setup Overview Transmission LED Manual Button Mood Buttons (on side of Plug-in). Press to toggle Plug-in on/o All O Button On/O Buttons LED. Blue when power is on / amber Bank Selector when o IMPORTANT: Please retain these instructions for guidance on how to link Remote Handsets and other LightwaveRF controllers. -
Page 5: Lamp Compatibility
Device setup Lamp Compatibility Before you begin setting up and using the Plug-in Dimmer, you must ensure that you have compatible lamps (bulbs). Ensuring the compatibility of your lamps with LightwaveRF Plug-in Dimmers will ensure that you get the best experience from your lighting setup. - Page 6 6 seperate LightwaveRF controllers in total. NOTE: If you are using a smartphone/tablet/PC to control the Plug-in via the Lightwave Link, this will always count as ONE controller and take up one memory slot even if you are using multiple smartphones/tablets.
- Page 7 Device setup NOTE: Linking mode lasts for 12 seconds; if no signal is received from a remote handset during this time then the Plug-in will automatically exit linking mode without linking the device. If, when expecting a quick flashing blue LED to confirm pairing, a slow amber flash is received instead, then the Plug-in memory is FULL and no further remotes may be linked with it unless one of the existing remotes is unpaired first (see below).
- Page 8 NOTE: Reliable range of operation is around 15 metres indoors and up to 100m outdoors using the Lightwave Link. This figure may vary depending upon the environment; very thick walls, bodies of water or large metal objects may interfere with radio range.
-
Page 9: Manual Operation
Manual operation Manual operation • Plug the LightwaveRF Plug-in Dimmer Socket into a standard 13A wall socket and ensure that the wall socket is turned on. • Plug a working portable lamp into the Plug-in Dimmer and ensure that it is turned on. -
Page 10: Remote Operation
Remote operation Control with a LightwaveRF controller or smartphone • Press ‘on’ button controller, Smartphone or Web App once to switch the Plug-in Dimmer on (LED indicator will illuminate blue). Hold the button to increase light level. • Press ‘o ’ button Controller, Smartphone or Web App to switch the Plug-in Dimmer o... - Page 11 Remote operation The mood buttons allow the Plug-in Dimmers (and/or other LightwaveRF devices) that are linked to the Mood Remote to be grouped together on one button command. When saving a mood on the Mood Remote, the status of any linked devices (i.e.
- Page 12 Creative ideas 1. (Easy): Family Safety Products Required: Plug-in dimmer, PIR motion sensor Here we have a LightwaveRF plug-in dimmer paired to a PIR Motion Sensor. When somebody is detected by the sensor, it triggers the plug-in automatically and turns a lamp on. So, when one of the kids needs to use the bathroom in the middle of the night, the path is safely lit for them.
- Page 13 At the end of the evening, press the ‘all o ’ button to turn o all lights and lamps. Adding the Lightwave Link allows scene lighting to be controlled via a smartphone.
- Page 14 This setup gives you control over your devices from anywhere in the world. Here we have ceiling lights controlled by dimmers and lamps plugged into LightwaveRF power sockets or plug-in dimmers. Via the Lightwave Link, every light can be controlled using a smartphone wherever you are. So, when you’re away on holiday, you can turn on lights to make it look like someone’s...
-
Page 15: Troubleshooting
The Plug-in will not consistently operate remotely. Solution: The controller/Lightwave Link may be encountering interference or may be at the edge of its reliable range of operation. First, ensure that there are no large pieces of metal or bodies of water in the path of the transmission. - Page 16 Troubleshooting Problem: The Plug-in won’t turn on/o and the LED does not light up. Solution: First, check that there is a load (suitable connected light turned on). If so, check that there is a fully functioning connected lamp (bulb); if there is no load (possibly because the lamp has failed) the LED will not illuminate and the Plug-in will not function.
- Page 17 FAQs Can I incorporate a Plug-in into a mood? Yes: Plug-ins can be incorporated into a mood. Can I turn o the LED indicator light? No it is not possible to turn o the LEDs as they are necessary to signify the Plug-in’s status.
- Page 18 Yes. There is a limit of 300W; exceeding this could damage the unit. How many devices can I have on the Lightwave system? Each device has 6 memory slots for up 6 controllers. Note: The Lightwave Link allows a number of di erent smartphones to control the Plug-in...
-
Page 19: Specification
Technical Specification Specification RF frequency: 433.92 MHz Input rating: 220-240V~ 50Hz. Output rating: 40W Min. 300W Max. Standby Energy Use: Less than 1W Warranty: 2 year standard warranty... - Page 20 Version 2.1 2 Quadrant Park Mundells Welwyn Garden City Herts AL7 1FS 01707 386035 www.lightwaverf.house...
Need help?
Do you have a question about the LW301 and is the answer not in the manual?
Questions and answers