Recording - Panasonic SC-AKX600 Operating Instructions Manual

RDS broadcasting
For the United Kingdom and Ireland
This system can show the text data transmitted by the
radio data system (RDS) available in some areas.
Press [DISPLAY].
PS Programme service
PTY Programme type
FREQ Frequency
Note:
RDS may not be available if reception is poor.
AM allocation setting
By main unit only
This system can also receive AM broadcasts allocated in
10 kHz steps.
1
Press [CD/RADIO/AUX] to select "FM" or "AM".
2
Press and hold [CD/RADIO/AUX].
After a few seconds, the display panel shows the current
minimum radio frequency. Release the button when the
minimum frequency changes.
• To go back to the initial setting, do the above steps
again.
• Preset frequencies are erased after you change the
setting.

Recording

This system can record up to 800 folders (maximum 999
tracks in an album) or a total of 8000 tracks, depending
on the available storage capacity of the internal memory
or the USB device in
USB B
To check storage space
In the stop mode, press [DISPLAY].
• "UPDATE" is shown when the system is reading the
device.
• "NODEVICE" is shown if there is no USB device
connected to .
USB B
Note:
•
All recordings are in ".mp3" format.
•
You cannot do recording when you are using random
playback mode.
• The DJ function is switched off during recording.
•
Repeat playback mode is cancelled during recording.
•
A new album is added each time you do a recording.
•
The sequence of album may change after the recording.
•
The recordings are kept in a folder named "REC_DATA" in
the USB device or the internal memory.
•
USB status indicator blinks in red during USB recording.
.
Basic recording
1
Select the source you want to record.
CD-DA
Prepare the disc playback mode.
Record all tracks
Record a specified
track
Make sure the disc is stopped.
Radio
Tune in to the radio station.
External equipment
Connect and play the equipment
(Z"External equipment").
2
Press [MEMORY REC 7/9] or [USB REC 7/9] to
start recording.
The name of the folder that keeps the recording is
shown.
Stop recording Press [8]. "WRITING" is shown.
Pause recording Press [MEMORY REC 7/9] or
[USB REC 7/9] during recording.
Press again to continue recording.
Note:
You can pause during recording from the
radio, AUX 1 or AUX 2 (except in
"SYNCHRO" mode). A track mark is
added every time you pause (Z"Adding
track marks").
Note:
•
Wait for a few seconds for the system to prepare the USB
device before you start recording.
•
When the next track of the disc is being recorded, it will be
shown on the display.
█
High-speed recording
CD-DA disc recording speed:
CD, CD-R: Three times (3x) the normal speed.
CD-RW: Two times (2x) the normal speed.
1
Put in the disc you want to record.
2
Press [REC MODE] to select "NORMAL" or
"HI-SPEED" and then press [OK].
3
Press [USB REC 7/9] or [MEMORY REC 7/9] to
start recording.
Note:
•
If you cannot record at high-speed because of the
condition of the disc, record at normal speed.
•
The sound is muted during high-speed recording.
Select "OFF PLAYMODE"
(Z"Play menu").
Select "1-TRACK"
(Z"Play menu").
11