ENTRY TIME SETTING minutes seconds SIREN DURATION minutes Tamper Mains on Alarm Signalling PANIC FACILITY Silent operation Audible operation Low battery FOR SERVICE TELEPHONE: YOUR ACCOUNT NUMBER: FM Electronics Ltd. Manufacturer of quality wireless products. CI-145 ISS 1...
Page 2
ARMING THE ALARM SYSTEM WHILST REMAINING ON THE PREMISES Key in your new 4 digit pin number twice. Key in your 4 digit pin number. The flashing indicators will now stop. Press Part set key The indicators illuminate to show which zones are being armed. If you make a mistake when keying in a number, press the Full Set key to exit and start again.
Page 3
KEYPAD TAMPER If incorrect attempts are made to enter the pin number, a tamper alarm will Low battery Illuminated - Control panel battery fault. (Call your alarm company) operate, Flashing with a zone indicator - A detector battery needs replacing. (Internal audible in daytime.
Page 4
PREVENTING FALSE ALARM Explanation of indicators on the control panel When you are away from home with the alarm system armed, Dogs or Cats must not be allowed access to rooms protected by PIR movement detectors. Always disarm the system immediately on entry and ensure that children or Panic Fire pets do not deviate from the entry route until the system has been disarmed.