FM4000 SERIES DETECTION ZONES ALARM SYSTEM ZONE 1____________________________________________________ ZONE 2____________________________________________________ OPERATING INSTRUCTIONS ZONE 3____________________________________________________ ZONE 4____________________________________________________ Panic Fire ZONE 5____________________________________________________ Detection zones ZONE 6____________________________________________________ ZONE 7____________________________________________________ Full set ZONE 8____________________________________________________ PANIC ____________________________________________________ Part set FIRE ____________________________________________________ EXIT TIME SETTING minutes...
Page 2
Enter your 4 digit pin number. ARMING THE ALARM SYSTEM WHILST REMAINING ON THE PREMISES Press key 7. Key in your 4 digit pin number. The full set indicator on the panel will flash. Press Part set key Key in your new 4 digit pin number twice. The flashing indicators will now stop.
Page 3
PREVENTING FALSE ALARM Explanation of indicators on the control panel When you are away from home with the alarm system armed, dogs or cats must not be allowed access to rooms protected by PIR movement detectors. Always disarm the system immediately on entry and ensure that children or Panic Fire pets do not deviate from the entry route until the system has been disarmed.
Page 4
KEYPAD TAMPER If incorrect attempts are made to enter the pin number, a tamper alarm will operate. 6 Low battery Illuminated Control panel battery fault. (Call your alarm company) (Internal only if the system is disarmed. Full alarm when armed). Flashing with a zone indicator - A detector battery needs replacing.
Need help?
Do you have a question about the FM4000 Series and is the answer not in the manual?
Questions and answers