Selecting An Audio Source - Subaru Legacy Owner's Manual

SELECTING AN AUDIO SOURCE

1.
Press the "AUDIO/TUNE" knob.
The screen can also be displayed by selecting
followed by (AUDIO).
AUDIO
If the audio control screen appears, select
(Source) on the audio screen or press the "AUDIO/
TUNE" knob again.
2.
Select the desired source.
NOTE
When there are two pages, select
REORDERING THE AUDIO SOURCE
1.
Display the "Select Audio Source (Select Audio Source)"
2.
Select
Reorder
Source
3.
Select the desired audio source then
reorder.
4.
Select
OK
BASIC OPERATION
or to change the page.
(Reorder).
(OK).
3
or to
55