Av Bridge Compliance And Ce Declaration Of Conformity - VADDIO AV Bridge User Manual

AV Bridge

AV Bridge Compliance and CE Declaration of Conformity

Compliance testing was performed to the following regulations:
FCC 47 CFR Part 15, Subpart B/Oct. 2009
ICES-003, Issue 4: 2004
EN-55011:2007 + A2: 2007
EN 55022:2006 + A1: 2007
CISPR 22:1997
IEC 60950-1:2005 (Second Edition); Am 1:2009
EN 60950-1:2006+A11:2009+A1:2010+A12:2011
EMC Directive 2004/108/EC
FCC Part 15 Compliance
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the interference at his/her own expense.
Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This
device must accept any interference including interference that may cause undesired operation of the device.
Changes or modifications not expressly approved by Vaddio can affect emission compliance and could void the
user's authority to operate this equipment.
ICES-003 Compliance
This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set out
in the Radio Interference Regulations of the Canadian Department of Communications.
Le présent appareil numérique n'emet pas de bruits radioélectriques dépassant les limites applicables aux
appareils numeriques de la classe A préscrites dans le Règlement sur le brouillage radioélectrique édicte par le
ministère des Communications du Canada.
European Compliance
This product has been evaluated for Electromagnetic Compatibility under the standards for Emissions and
Immunity and meets the requirements for E4 environment. This product complies with Class A (E4 environment).
In a domestic environment this product may cause radio interference in which case the user may be required to
take adequate measures.
Standard(s) To Which Conformity Is Declared:
EN-55011:2007 + A2:2007
EN 55022:2006 + A1:2007
EN 61000-6-4:2007
EN 61000-3-2:2006
EN 61000-3-3:2008
EN 61000-6-2:2005
EN 55024:1998 + Amendments A1:2001 + A2: 2003
EN 61000-4-2:2008
EN 61000-4-3:2008
EN 61000-4-4:2004 + Corrigendum 1:2006 + Corr. 2:2007
EN 61000-4-5:2005
EN 61000-4-6:2008
EN 61000-4-8:2009
EN 61000-4-11: Second Edition: 2004
IEC 60950-1:2005 (Second Edition); Am 1:2009
EN 60950-1:2006+A11:2009+A1:2010+A12:2011
Vaddio AV Bridge - Document Number 342-0518 Rev C
Class A
Class A
Class A
Class A
Class A
Safety
Safety
Class A
Emissions
Conducted and Radiated Emissions
Electromagnetic Compatibility
Limits for Harmonic Content
Limits for Voltage Fluctuations and Flicker
Immunity for Industrial Environments
Immunity
Electrostatic Discharge
Radiated Immunity
Electrical Fast Transients
Surge Immunity
Conducted Immunity
Power Frequency Magnetic Field
Voltage Dips, Interrupts and Fluctuations
Safety
Safety
Page 22 of 36