Setting The Macro Interval Time - Marantz RC1400 User Manual

Setting the Macro Interval Time

When a macro program is executed, control
signals are transmitted in sequence. This
transmission interval (interval time) can be set
in 0.5-seconds units from 0.5 to 5 seconds.
If the interval time is set in this Setup mode, the
interval times for all programmed macros are
changed. If necessary, use EDIT (see page
33) in the macro program to change the
individual transmission times.
The factory default setting for the transmission
interval is 1 second.
This example shows how to set the interval
time to 5 seconds.
2
1
2
3
4
5
6
RC1400N 01 ENG
3 4
LEARN
PAGE 1 2 1 2 3 4
Hold down the M button r for three
seconds or more.
The menu is displayed.
Press the > button y to display the
second page SETUP menu.
Press the D2 (I-TIME) direct button t.
cursor button @0 to set
Press the or
the interval time.
Holding down the cursor button fast-forwards the
time indicator.
Press the OK cursor button @0 to enter the
interval time.
Once the setting is finished, press the M
button r.
42
Page 42
LEARN
1 2 3 4
Adobe PageMaker 6.5J/PPC
03.10.6, 4:19 PM