Table of Contents
Advertisement
C
Notes About the Flash
When you need to use the flash, such as when shooting in dark locations or when the subject is
backlit, press the m (flash pop-up) button to raise the flash (A 5, 44).
C
The Auto Off Function
2 5 m 0 s
2 5 m 0 s
1 9 0 0
1 9 0 0
The time that elapses before the camera enters standby mode is about 30 seconds. The time can
be changed using the Auto off setting in the setup menu (A 72).
While the camera is in standby mode, the monitor turns back on if you perform any of the
following operations:
➝ Press the power switch, shutter-release button, A (shooting mode) button, c (playback)
button, or b (e movie-record) button
No operations
performed
Camera enters
standby mode.
Flashes
No operations
performed
3 min
Camera turns off.
21
Advertisement
Table of Contents
