Marantz TT-15S1 User Manual page 13

ASSEMBLING AND ADJUSTING
9. Attaching the motor pulley
Attach the motor pulley to the motor.
Using the adjustment screwdriver included to fix the
pulley's 3 plastic screws.
Be careful not to turn the screws with too much force,
as they are made from plastic and can break easily.
When attaching the pulley, fix with approximately 3mm
space between the pulley and motor.
10. Installing the motor
From underneath the turntable chassis, place the motor in
the hole section at the back left of the turntable chassis.
(Do not fix it to the turntable base)
Does not touch
Caution:
When installing the motor, in order to prevent motor
vibrations from being transmitted to the turntable base,
install the motor so that it does not touch the base.
Included screwdriver
for adjustment
3mm
11. Installing the belt
Use one of the belts included and attach it between the
motor pulley and turntable.
When attaching the belt, hook it over the central slot.
(There are 2 belts included with the turntable. Please
keep one as a spare.)
Central slot
The positions for attaching the motor pulley belt are
different when playing 45 or 33 rpm records.
Change the position of the belt to suit the record that
you want to play.
Attach to the
lower side
33 rpm
Caution:
When changing the position of the belt, use the gloves
included, and be careful not to damage the belt in any
way.
Attach to the
upper side
45 rpm
9