Marantz TT-15S1 User Manual page 11

ASSEMBLING AND ADJUSTING
c) Attach the cartridge that you attached in the previous
step to the tone arm.
Tone arm
Head shell
Cartridge
• When using the included cartridge
Attach to the front attachment hole position on the tone
arm.
• When using a different cartridge
Attach the cartridge so that it is 32mm from the stylus
tip.
d) Connect the 4 tone arm wires to their respective
terminals on the attached cartridge.
When using a different cartridge, refer to the cartridge
instruction manual to connect the wires.
Caution:
Be careful when connecting the wires, as they are thin
and break easily.
It is easy to connect the wires if you use tweezers etc.
Screw
32mm
For the included cartridge
White Red
Blue Green
6. Adjusting arm balance
a) Remove the anti-skating adjustment screw.
b) Attach the counter weight to the back of the arm.
c) Remove the cartridge cover.
Caution:
Make sure that the cartridge stylus tip does not touch the
turntable etc. and that the stylus tip does not get
damaged.
Anti-skating
adjustment screw
Counter weight
Tone arm
Cartridge cover
7