Changing Dsmobilecapture Scan Settings (For Macintosh); Image Settings - Brother DS-820W User Manual

Scan Using Your Computer

Changing DSmobileCapture scan settings (for Macintosh)

Image settings

Click the Image tab to choose image type and to set several basic scan settings.
NOTE
This image is from the DS-920DW.
(1)
(2)
(7)
(8)
(9)
(1) Image Selection Box
(2) Duplex
(3) Brightness
(4) Contrast
(5) Resolution
(6) Invert
(7) Page Size
(8) Profiles
(9) Default
Choose the type of document you want to scan.
(DS-920DW only) Select the Duplex check box to perform Duplex (2 side) scan-
ning.
Adjusts the lightness or darkness of an image. The range is from -100 to +100. The
factory default is 0.
Adjusts the range between the darkest and the lightest shades in the image. The
range is from -100 to +100. The factory default is 0.
Determine the quality of the scanned image. The factory default is 200 dpi.
Reverse the brightness and the colors in the image.
Page Size allows you to capture a portion of the scanned document. Choose your
paper size from the Page Size pop-up list.
Save or change the scanning setting in the dialog box of Scanner Properties.
Reset values in this and all other Properties tabs to the original factory settings.
(3)
(4)
(5)
(6)
(10)
37
5