11. STAND-ALONE TEST
⑤For the purpose of the Standalone Test, Change the Phone to " ptest mode"
and then Click the " Reset" bar.
⑥Select " Non signaling" in the Quick Bar menu. Then Standalone Test setup is finished.
11.1.2. Tx Test
①Click " Non signaling mode" bar and then confirm " OK" text in the command line.
①
LGE Internal Use Only
⑤
Change " ptest mood"
- 164 -
Copyright © 2008 LG Electronics. Inc. All right reserved.
⑥
Only for training and service purposes